HOYONN CHEMICAL

Sand Texture Agent TF-101

Sand Texture Agent TF-101


This product is a high melting point fluorocarbon polymer, used as a texture additive in powder coatings, very few additives can produce fine and uniform grain effect, clear texture, soft touch, giving powder coatings excellent surface hardness, scratch resistance and decorative effect.


Feature:
●This product can be used alone or used with bentonite as sand texture agent for powder coating formula. 0.1-0.3% dosage can get uniform and fine sand texture;
● It can make the powder coating excellent surface hardness and scratch resistance;
● No impact on the adhesion of recoating film;
●With the dosage of this product increase, the fineness of sand texture will be increased;
● This product can be used for indoor and outdoor powder coating systems.

Technical Date
Appearance‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ White Powder
Whiteness‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ >95%
D50 Particle Size ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 30±10 µm
Standard relative density‥‥‥‥‥‥‥‥‥‥‥‥‥ 2.16 g/cm³
Volume density‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 300-500 g/L
Melting Range‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 322-332 ℃

Use Method

Recommended dosage: 0.1% to 0.3% of the total formula.

When using this product, it is pre-dispersed by mixing with the filler used in the formula at a ratio of 1:10, and then mixed and dispersed with other components in the formulation.


Storage

Moisture-proof paper bucket with PE inner bag, N.W: 25kgs/Bucket


This product is non-dangerous goods, transport process should avoid severe vibration, to avoid high temperature sunshine, to prevent product agglomeration.

Stored in a cool dry and ventilated place, at room temperature to maintain stability. The shelf life is 2 years at room temperature below 25 ° C.


Attention:

After opening the bag the unused product should be tighten to prevent the moisture absorption.

This product is prohibited from weight, and shall not be separate high-speed mixing of the goods, so as not to agglomerate easily dispersed.

客服系统