Sand Texture Agent TF-102

Sand Texture Agent TF-102

This product is a modified fluorocarbon polymer, used as a powder coating texture additives, very few additives can produce fine and uniform sand grain effect, with clear texture and soft touch. giving powder coatings excellent surface hardness, scratch resistance and decorative effect. Applied in aluminum profile, computer case, television, sports equipment, industrial equipment, and other surface coating.


●This product can be used alone or used with bentonite as sand texture agent for powder coating formula. 0.2-0.5% dosage can get uniform and fine sand texture;
● It can make the powder coating excellent surface hardness and scratch resistance;
● No impact on the adhesion of recoating film;
● With the dosage of this product increase, the fineness of sand texture will be increased;
● This product can be used in all powder coating series.
● Affordable, cost-effective.

Technical Date

Appearance                                                             White Powder
Whiteness                                                                      >95%
D50 Particle Size                                                      20-40 micron
Standard relative density                                       2.16 g/cm3
Volume density                                                        300-500 g/L
Melting Range                                                          322-332 C

Use Method

Recommended dosage: 0.2% to 0.5% of the total formula.

When using this product, it is pre-dispersed by mixing with the filler used in the formula at a ratio of 1:10, and then mixed and dispersed with other components in the formulation.


Moisture-proof paper bucket with PE inner bag,N.W: 25kgs/Bucket

This product is non-dangerous goods, transport process should avoid severe vibration, to avoid high temperature sunshine, to prevent product agglomeration.

Stored in a cool dry and ventilated place, at room temperature to maintain stability. The shelf life is 2 years at room temperature below 25 C.


After opening the bag the unused product should be tighten to prevent the moisture absorption.

This product is prohibited from weight, and shall not be separate high-speed mixing of the goods, so as not to agglomerate easily dispersed.